BMW E9X & E8X Bucketed Low Pressure Pump (non-modular) - 1M, 128i, 135i, 328i, 330i, 335i, X1

BMW E9X & E8X Bucketed Low Pressure Pump (non-modular) - 1M, 128i, 135i, 328i, 330i, 335i, X1The Precision Raceworks BMW E9x E8x Bucketed Low Pressure Pump (Stage 2 & 2. 5 ) are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274) or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump, and all options are 100% E85 compliant. Stage Options: Stage 2 (2. 6 liters per minute): Our Stage 2 bucketed fuel pump comes with a single

The Precision Raceworks BMW E9x/ E8x Bucketed Low Pressure Pump (Stage 2 & 2.5 ) are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274) or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump, and all options are 100% E85 compliant.

Stage Options:

• Stage 2 (2.6 liters per minute): Our Stage 2 bucketed fuel pump comes with a single Walbro 450 (F90000274) fuel pump. This pump can support up to 575whp (Rated for 500whp on 100% E85).

• Stage 2.5 v2 (3.9 liters per minute): Our Stage 2.5 v2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85).

Key Features

• Non-Modular Design: The Non-Modular pump is a non-upgradeable pump. We do not offer any upgrade kits that will work with this pump. This kit is for those that are looking for a specific HP and have no plans on going any bigger. If you think you might want to go for higher horsepower in the future, then consider getting our Modular Pump.

• Assembly Options: All kits are fully assembled and ready to drop-in!

• Pump Comparison: While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than ¼ full and should not be used for road course racing. This is not a disadvantage of only bucketless designs but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining ¼ tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

To reach the advertised ability of these fuel pumps, use of the Precision Raceworks in-tank filter regulator assembly is required.

Note: Some European Spec vehicles may require re-use of the top hat due to differences in emissions requirements.

This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away.

Specifications

• Factory BMW Pump

• Pump Flow (72psi / 5bar): XXX GPM

• Pump Weight:

• Horsepower Supported (Pump Gas):

• Horsepower Supported (100% E85): NOT COMPATIBLE

• Stage 2:

  • Pump Flow (72psi / 5bar): 0.7 GPM / 2.6 LPM
  • Pump Weight: 3.98 lbs
  • Horsepower Supported (Pump Gas): 575
  • Horsepower Supported (100% E85): 500
  • Aftermarket EKP Required: No

• Stage 2.5 v2:

  • Pump Flow (72psi / 5bar): 1.0 GPM / 3.9 LPM
  • Pump Weight: 3.98 lbs
  • Horsepower Supported (Pump Gas): 650
  • Horsepower Supported (100% E85): 550
  • Aftermarket EKP Required: No

Fitment

• BMW 1 Series M (2011)
• BMW 128i (2008 to 2013)
• BMW 135i (2008 to 2013)
• BMW 135is (2013)
• BMW 323i (2007 to 2011)
• BMW 325i (2006)
• BMW 325xi (2006)
• BMW 328i (2007 to 2013)
• BMW 328i Xdrive (2009 to 2013)
• BMW 328xi (2007 to 2008)
• BMW 330i (2006)
• BMW 330xi (2006)
• BMW 335i (2007 to 2013)
• BMW 335i Xdrive (2009 to 2011)
• BMW 335is (2011 to 2013)
• BMW 335xi (2007 to 2008)
• BMW X1 (2012 to 2015)

Elevate your driving experience with our high-performance fuel pumps, designed for enthusiasts who demand quality and reliability. Upgrade today and experience the difference!